中文
ENGLISH
News
Current Location： Home>> news >> PVC garden tube how to identify good or bad
PVC garden tube how to identify good or bad
time:2017-06-24 09:12:53
When applying pressure, please slowly open / close any valve, so as to avoid the impact of pressure, damage to the product.
With the internal pressure changes will be slightly expansion and contraction, in use, please cut the hose into a slightly longer than you need.
Text and lines in the more small part, in order to avoid multi-color overprint is not allowed, can be designed as a single package. Especially for the design of the width of the thin lines, in order to avoid the printing of the finished product is unclear, the width can not be less than 0.1mm.
Anti-white text printing, early optimistic about the font preview. If PVC plastic hose body needs to print the font is small, to use monochrome. Round head body, black body PVC, PVC plastic hose printing should pay attention to what the line is a better choice.
Place the plastic hose on the plane, plug the side of the hose with the stopper, keep it sealed, insert a solid ball, dock the vacuum port of the other port and the vacuum table, and test the hose pressure value within 60s , Keep this pressure for about ten minutes. During this period you can view the outside of the hose to see if there is a depression or collapse.
With the internal pressure changes will be slightly expansion and contraction, in use, please cut the hose into a slightly longer than you need.
Text and lines in the more small part, in order to avoid multi-color overprint is not allowed, can be designed as a single package. Especially for the design of the width of the thin lines, in order to avoid the printing of the finished product is unclear, the width can not be less than 0.1mm.
Anti-white text printing, early optimistic about the font preview. If PVC plastic hose body needs to print the font is small, to use monochrome. Round head body, black body PVC, PVC plastic hose printing should pay attention to what the line is a better choice.
Place the plastic hose on the plane, plug the side of the hose with the stopper, keep it sealed, insert a solid ball, dock the vacuum port of the other port and the vacuum table, and test the hose pressure value within 60s , Keep this pressure for about ten minutes. During this period you can view the outside of the hose to see if there is a depression or collapse.
prev：PVC steel pipe in the use of what is the characteristics